Sharp AM-900 - Manual (Page 45)

Setting the Date and Time
43
1. Installation
Setting the Date and Time
The date and time appear in the fax mode display and are printed at the top of
every page you fax. Set the date and time as explained below.
i If you will not be using fax mode, the date and time do not need to be set.
i Note that the date and time will need to be reset if the machine is
unplugged or a power failure occurs. When the date and time need to be
set, the following messages appear in fax mode:
1
Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2
Press .
3
Press .
4
Enter a two-digit number for the month
(“01” for January, “02” for February,
“12” for December, etc.).
Example: February
x To correct a mistake, press .
FAX MENU
Z
Display:
The currently set
date appears:
DATE 01-01-2005
DATE 02-01-2005
FAX SETTING
1: DATE&TIME SET
CONTRAST
REDIAL
BROADCAST
SPEED
QUALITY
E-SORT
ZOOM
PRINT STOP DUPLEX SCAN
MENU
ENTER
Z A
COPY SCAN FAX !
FAX
MENU
ENTER
01/01 12:00 FAX DATE/TIME UNSET