Sharp AM-900 - Manual (Page 85)

Using an Extension Phone to Send a Fax
83
3. Sen
din
g
Fa
x
e
s
Default Line Monitor setting
The default setting for Line Monitor (listening to the line and fax tones through
the speaker during a fax transmission) is initially MONITOR OFF. If desired,
you can change the default setting to MONITOR ON.
1
Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2
Press twice.
3
Press to select MONITOR ON or
to select MONITOR OFF.
4
Press repeatedly to exit.
FAX MENU
Display:
FAX SETTING
1: MONITOR ON
The display briefly shows
your selection, then:
4: TIMER SEND
Using an Extension Phone to Send a Fax
If you have connected an extension phone to the TEL. SET jack on the
machine as explained on page 15, you can use the extension phone to send a
fax.
i Using an extension phone to send a fax allows you to listen to the line and
talk to the other party before faxing.
i This procedure cannot be used when the machine is busy with another job.
Note that if the transmission is not sucessful because the line is busy or a
line error occurs, automatic redialing will not take place.
1
Make sure that the date and time display of fax mode appears (if needed
press ).
FAX