Sharp AM-900 - Manual (Page 50)

General Machine Settings
48
Auto clear
After a copy job or fax job is completed, the machine will automatically return
all temporary copy settings or all temporary fax settings to the default settings
if 60 seconds elapses without any keys being pressed on the operation panel.
If desired, you can change the amount of time that must elapse to 30 seconds
or 120 seconds, or turn auto clear off so that temporary settings are never
automatically cleared.
1
Press (or ) and then .
2
Press .
3
Press a number key to select the
desired setting:
: 30 SEC
: 60 SEC
: 120 SEC
: OFF
4
Press repeatedly to exit.
COPY SCAN MENU
The display briefly shows
your selection, then:
Display:
COMMON SETTING
3: KEY TONE
1: 30 SECONDS