Sharp AM-900 - Manual (Page 123)

Scanning From the Operation Panel
121
7. Scanning
Windows
“
2000
1 . Click the Start button, point to Settings, and select Control Panel.
2 . In the Control Panel, double-click Scanners and Cameras.
3 . Select SHARP AM-900 and click the Properties button.
4 . Click the Events tab in the SHARP AM-900 Properties.
5 . Select SC1 from the Scanner events list.
6 . In Send to this application, select the program that you wish to link to scan
menu SC1 (make sure only one program is selected).
7 . Click the Apply button.
8 . Repeat Steps 5 through 7 as needed for any of the other scan menus (SC2 to
SC6) that you wish to use. When finished, click the OK button to close the
window.
i To make the new scanner event settings take effect, you must restart your
computer.