Sharp AM-900 - Manual (Page 75)

Storing a Number for Speed Dialing
73
3. Sen
din
g
Fa
x
e
s
Editing and deleting auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2
Press .
3
Press .
4
Press .
5
Press to edit a number, or to delete a number.
6
Enter the 2-digit Speed Dial number that you wish to edit or delete (for
example, press ), or press or until the name or fax
number of the destination appears in the display and press .
x If you pressed for CLEAR in Step 5, go to Step 12.
7
If you selected EDIT in Step 5, make the desired changes to the number.
x To move the cursor to the right, press . When the cursor is over a digit
that you wish to change, simply enter the new digit. The new digit will
replace the old digit. To backspace and clear digits, press .
x If you do not wish to change the number, go directly to Step 8.
FAX MENU
Z A
ENTER
A
Z
1: SPEED DIAL
Display:
FAX SETTING
1: NEW, 2: CHANGE
1: EDIT, 2: CLEAR