Sharp AM-900 - Manual (Page 82)

Other Fax Transmission Settings
80
Automatic redialing after a line error
If you use Direct Keypad Dialing, Speed Dialing or Search Dialing to send a
fax and a line error occurs during the transmission, the machine will
automatically redial the number and attempt to complete the transmission.
Retransmission will begin from the page which was being transmitted when
the error occurred. The machine will make one attempt at retransmission after
an interval of two minutes.
i To cancel a job that is waiting for automatic redialing, follow the procedure
in Checking and canceling stored fax jobs on page 77. (When you scroll to
the job during the procedure, the number or name of the destination will
alternate with RECALL: ERROR in the display.)
Recall interval for automatic redialing after a line error
occurs
If desired, you can change the interval after which the machine makes an
automatic redialing attempt when a line error occurs.
i The initial setting is “02” minutes.
1
Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2
Press .
3
Press .
4
Press .
5
Press .
FAX MENU
1: AUTO RECALL
Display:
FAX SETTING
1: RECALL [BUSY]
1: RECALL INTERV.
ENTER (01 - 15) 02
RECALL INTERVAL