SOYO SY-5S - Manual (Page 26)

Quick Installation Guide SY-5STM
22
2. Wake-On-LAN (WOL)
Attach the 3-pin connector from the LAN card which supports the
Wake-On-LAN (WOL) function to the JP44 connector on the
mainboard. This WOL function lets users wake up the connected
computer through the LAN card.
Please install according to the following pin assignment:
3. Infrared (IR)
Plug the 5-pin infrared device cable to the IR connector. This will
enable the infrared transfer function. This mainboard meets both the
ASKIR and HPSIR specifications.
Please install according to the following pin assignment:
1 2 3 4 5
VCC IRRX GND IRTX
Serial Infrared (SIR) Connector
SIR Pin Assignment
Wake-On-LAN
JP44 Pin Assignment
5V GND SENSOR
1 2 3