SOYO SY-5S - Manual (Page 53)

BIOS Setup Utility SY-5STM
49
CHIPSET FEATURES SETUP
CHIPSET
FEATURES
Setting Description Note
Disabled Auto
Configuration
Enabled It is strongly recommended
to enable this option so that
the system automatically
sets all chipset feature
options on the left panel of
the screen (except for cache
update & BIOS cacheable). Default
L2 (WB) Tag Bit
Length 7bits
8bits Use the default setting Default
Disabled SRAM Back-to-
Back
Enabled Use this default setting Default
Disabled NA# Enable
Enabled Use this default setting Default
Starting Point of
Paging 1T
2T,4T,8T
Use this default setting Default
The following fields are READ-ONLY if [Auto Configuration] is set to
[Enabled]
Refresh Cycle
Time
15.6
62.4
124.8
187.2
Use the default setting Default
RAS Pulse Width
Refresh 4T,5T
6T
7T Use the default setting Default
RAS Precharge
Time 2T
3T
4T,5T
Use the default setting Default
RAS to CAS
Delay 2T
3T
4T,5T
Use the default setting Default