SOYO SY-5S User Manual

Page 91

Advertising
background image

SiS VGA Driver Installation

SY-5STM

87

6-3.3 AutoCAD R12 Setup

1. The following procedures assume that

Ø You have completed the unpacking & copy procedure.
Ø Your SiS ADI 4.2 drivers are located in C:\ADI42.
Ø Your AutoCAD R12 program is located in C:\ACADR12.
Ø Your AutoCAD R12 default drivers are located in

C:\ACADR12\DRV.

Ø Your AutoCAD R12 configure file ACAD.CFG is located in

C:\ACADR12.

2. Copy the RCPSIS.EXP driver file to C:\ACADR12\DRV. You

may complete this step with the following command:

COPY C:\ADI42\RCPSIS.EXP C:\ACADR12\DRV

3. Delete your original ACAD.CFG file. You may complete this step

with the following command:

DEL C:\ACADR12\ACAD.CFG

4. Restart your AutoCAD R12 program as usual.

5. AutoCAD R12 will ask you to complete the configuration

procedures since it cannot find the configuration file

ACAD.CFG.

6. Follow the instructions of AutoCAD R12 to proceed with

configuration.

7. In “ Available Video Displays:” item, choose the “ SiS Super VGA

ADI v4.2 Display and Rendering driver” item.

8. In “ Select Display Resolution” screen, choose which display

driver you want to use.

9. Perform the listed instructions and the system will start with the

selected display setting.

Advertising