SOYO SY-5S - Manual (Page 50)

BIOS Setup Utility SY-5STM
46
System Boot Control Settings (continued)
System Boot
Control Settings
Setting Description Note
Normal Gate A20 Option
Fast Allows RAM access
above 1MB using the fast
gate A20 line. Default
Enabled This allows to perform a
redundancy check on the
parity bit in the data
strings. This method is
used for error detection
when the parity is not
found. Default Memory Parity
Check
Disabled
3-2.4 Typematic Settings
Typematic
Settings
Setting Description Note
Disabled Default Typematic
Rate Setting
Enabled Enables to adjust the
keystroke repeat rate.
The following [Typematic Rate] and [Typematic Delay] fields are
active only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate 6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec) Choose the rate at which
a character is repeated
when holding down a
key. Default
Typematic Delay 250 (msec)
500 (msec)
750 (msec)
1000 (msec) Choose how long after
you press a key down the
character begins
repeating. Default