SOYO SY-5S - Manual (Page 54)

BIOS Setup Utility SY-5STM
50
CHIPSET FEATURES SETUP (Continued)
CHIPSET
FEATURES
Setting Description Note
CAS# Pulse
Width (FP) 2T
1T Use the default setting Default
CAS# Pulse
Width (EDO) 1T
2T Use the default setting Default
RAMW#
Assertion Timing 3T
2T Use the default setting Default
CAS Precharge
Time (FP) 1T/2T
2T,1T
Use the default setting Default
CAS Precharge
Time (EDO) 1T/2T
2T,1T
Use the default setting Default
SDRAM WR
Retire Rate X-2-2-2
X-1-1-1 Use the default setting Default
SDRAM Wait
State Control 1WS
0WS Use the default setting Default
Disabled Use the default setting Default Enhanced
Memory Write
Enabled
Disabled Use the default setting Default Read Refresh
Memory RD
Enabled
Disable
3T
CPU to PCI Post
Write
4T Use the default setting Default
Disabled Use the default setting Default CPU to PCI Burst
Mem. WR
Enabled