SOYO SY-5S - Manual (Page 88)

SiS VGA Driver Installation SY-5STM
84
What the Parameters Represent
The meaning of parameters used by SVGAUTL.EXE are explained
below:
Syntax:
>SVGAUTL[/D:mode_no][/F0:n0][/F1:n1][/F2:n2][/F3:n3][/PA:ta][/PB:tb]
where
/D:
Set the Video Mode to be mode_no which is a hex number.
For example:
Set 1024x768 256 color graphic mode.
>SVGAUTL/D:38<Enter>
/F0: For 640x480, set frame rate to be n0 Hz.
Three available frame rates are 60,72, and 75 Hz.
For example:
Set 640x480 graphic mode with 60Hz frame rate
>SVGAUTL/F0:60<Enter>
/F1: For 800x600, set frame rate to be n1 Hz.
Four available frame rates are 56,60,72, and 75 Hz.
For example:
Set 800x600 graphic mode with 72Hz frame rate
>SVGAUTL/F1:72<Enter>
/F2: For 1024x768, set frame rate to be n2 Hz.
Four available frame rates are 87(Interlace),60,70, and 75 Hz.
For example:
Set 1024x768 graphic mode with 60Hz frame rate
>SVGAUTL/F2:60<Enter>
/F3: For 1280x1024, set frame rate to be n3 Hz.
Two available frame rates are 87(Interlace) and 60 Hz.
For example:
Set 1280x1024 graphic mode with 60Hz frame rate
>SVGAUTL/F3:60<Enter>
/PA: Set Standby Timer to be ta minutes. (0<ta<15 min.)
For example: Set Standby Timer to be 5 minutes.
>SVGAUTL/PA:5<Enter>
/PB: Set Suspend Timer to be tb minutes. (0<tb<15 min.)
For example: Set Suspend Timer to be 5 minutes.
>SVGAUTL/PB:5<Enter>
Note:
1. Suspend Time is “ ta+tb” (i.e. standby time + suspend time).
2. The timers are not very accurate.