SOYO SY-5S - Manual (Page 65)

BIOS Setup Utility SY-5STM
61
3-8 INTEGRATED PERIPHERALS
Caution: Change these settings only if you are already
familiar with the Chipset.
The [INTEGRATED PERIPHERALS] option changes the values of
the chipset registers. These registers control the system options in
the computer.
The following screen shows default settings.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Parallel Port EPP Type
USB Controller
Power Button Over Ride
Ring Power Up Control
Power Up by Alarm
: 378
: Normal
: 3
: EPP1.9
: Disabled
: Enabled
: Enabled
: Disabled
ESC
F1
F5 : Quit
: Help
: Old Values
↑ ↓ → ←
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
Internal PCI/IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
Primary Master
UltraDMA
Primary Slave UltraDMA
Secondary Master UltraDMA
Secondary Slave UltraDMA
IDE Burst Mode
IDE Data Port Post Write
IDE HDD Block Mode
Onboard FDC Controller
Onboard UART 1
Onboard UART 2
Onboard UART 2 Mode
IR Duplex Mode
Use IR Pins
: Both
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Enabled
: Enabled
: Enabled
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Standard
: Half
: IR-RX2TX2
F6
F7 : Load BIOS Defaults
: Load Setup Defaults
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure
the IDE controls, FDC controls, and the onboard serial and parallel
ports.