SATO GT424 - Manual (Page 102)

Section 5: Interface Specifications
Page 5-20 GT Series Operator’s Manual
5.13 DRIVER PROTOCOL (CONT’D)
(3) Form Overlay Status Request
In receiving this command, the form overlay status is responded.
a) Command SOH (01H)+FO
b) Responded Status Definition
STX + Form Overlay Registration contents + ETX
c) Status Byte Definition
(4) Font Configuration Status request
In receiving this command, the printer font data is echoed.
a) Command SOH (01H) + FG
b) Responded Status Definition
STX + the following echo statuses (The echo byte number changes depending on the font
number) + ETX
No. Item Contents Byte number
1 Registration number 01 (ASCII code) 2
2 Registration name Registration name
(ASCII code) 16