Setting zero slash changeover -9, Setting jis kanji code changeover* -9, Setting kanji font style* -9 – SATO GT424 User Manual
Page 45: 5 setting zero slash changeover, 6 setting jis kanji code changeover, 7 setting kanji font style
Section 3: Configuration and Operation
GT Series Operator’s Manual
Page 3-9
3.5.5 Setting Zero Slash Changeover
You can use this setting to determine whether zeroes are printed
with a slash across them or not. The zero slash (excluding Kanji)
can be set to either "0" or "Ø".
Use the
/
buttons to select YES or NO. ‘YES’ means zeroes
will be printed with a diagonal slash across them. ‘NO’ means
otherwise. The default value is ‘NO’.
Press ENTER to select the desired option and proceed to the next
setting.
3.5.6 Setting JIS Kanji Code Changeover*
* option is only valid for printing in Japanese
The printer can be set to use either JIS code or Shift JIS code.
Use the
/
buttons to select JIS or SJIS. The default value is
JIS code.
Press ENTER to confirm your selection and proceed to the next
setting.
3.5.7 Setting Kanji Font Style*
* option is only valid for printing in Japanese
The Kanji font style can be set to either “GOTHIC” or “MINCHO”.
Use the
/
buttons to select GOTHIC or MINCHO. The default
value is GOTHIC.
Press ENTER to confirm your selection and proceed to the next
setting.