SATO GT424 User Manual
Page 12
Section 1: Introduction
Page 1-6
GT Series Operator’s Manual
1.1 GENERAL SPECIFICATIONS (CONT’D)
Note:
All the GT printers use the same command codes. The only differences are the allowable values repre-
senting print positions on the label. These values are specified in “dots” and will vary depending upon the
resolution of the printer and the amount of memory available for imaging the label.
Specification/
Model Name
GT408
GT412
GT424
Barcode
One-
dimensional
code
• UPC-A/E, EAN8/13, JAN8/13
• NW-7
• INTERLEAVED 2 of 5 (ITF)
• INDUSTRIAL 2 of 5
• MATRIX 2 of 5
• CODE39, CODE93, CODE128
• UCC/EAN128
• Customer barcode
• RSS-14
Two-
dimensional
code
•
QR code model 2, Micro QR (Ver 8.1)
•
PDF417 (Ver. 2.4, including micro PDF)
•
Veri code (Ver. 1.0)
•
MAXI code (Ver. 3.0)
•
Data matrix ECC200 (Ver. 2.0)
•
Synthetic symbol (UPC-A/E, EAN8/13, JAN8/13, CODE39, CODE128 CC-A/B/C
supported with RSS-14)
Magnification
Vertical 1 to 12 times
Horizontal 1 to 12 times (characters)
1 to 12 L (barcodes)
Rotation
Characters: 0°, 90°, 180°, and 270°
Barcode: parallel 1, serial 1, parallel 2, serial 2
Barcode Ratio
1:2, 1:3, 2:5, arbitrary
User mode
1. Volume set value indication 2. Print speed 3. Print density
4. Print position correction 5. Zero slash changeover 6. Kanji code changeover
7. Kanji font setting 8. Proportional pitch setting
Automatic diagnostics
Head check/ Head open/ Paper end/ Ribbon end/ Winding full/ Kanji ROM
check/ Test print
Noise emis-
sion
Radiant noise
VCCI Class B
Static with-
stand pressure
IEC Level 3
AC line noise
1000 Vp-p or more (50 nS to 1 µS pulse)
Optional accessories
•
Peel unit (with mounting winder)
•
Cutter unit
•
Non-separate unit
•
Simplified peel unit
•
Internal winding unit
•
External winding unit
•
RFID unit
•
Detection scanner unit
•
EXT connector (external signal)
•
Interface boards (serial RS-232C or Parallel IEEE1284)
•
USB Interface board
•
LAN (10BASE-T/100BASE-TX),
•
Wireless LAN (IEEE802.11b),
•
Mini LAN (10BASE-T/100BASE-TX)
Memory cartridge
24 MB