Siemens sitrans LU01 User Manual
Page 32
Page 26
SITRANS LU01 – INSTRUCTION MANUAL
7ML19985BE02
mmm
mm
Operat
ion
C.
If the SITRANS LU01 provides accurate and repeatable measurements, however
alternate Reading units, failsafe action, relay, or mA output operation is desired,
proceed to Application Parameters on page 32.
If all operating conditions cannot be observed during the System Performance Evaluation,
refer to Enhancement Parameters Reading Measurement (P920). Perform a Reading
Measurement simulation to verify programming.
Ensure the Programming Charts are altered accordingly, and a new System Performance
Evaluation is conducted, following any operation alteration or measurement difficulty
remedy.
Note:
Connect (or enable) process control / alarm equipment to the SITRANS
LU01 only after satisfactory performance is verified for all possible operating
conditions.