Star Micronics Line Thermal/Dot Printer - Manual (Page 108)

Rev. 0.00
3-96
STAR LIne Mode Command Specifications
ESC * r P n NUL
[Name] Set raster page length
[Code]
ASCII ESC * r P n NUL
Hexadecimal 1B 2A 72 50 n 00
Decimal 27 42 114 80 n 0
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : Raster image buffer length
Slip : -
Validation : -
[Function]
<Thermal>
Sets raster page length.
n is a decimal description (max. 255 digits) using ASCII characters.
n Page length
0 Continuous print mode (no page length setting)
1 ≤ n Specify page length
<Slip>, <Validation>
Use prohibited.
ESC * r Q n NUL
[Name] Set raster print quality
[Code]
ASCII ESC * r Q n NUL
Hexadecimal 1B 2A 72 51 n 00
Decimal 27 42 114 81 n 0
[Defined Area] Thermal : 0 ≤ n ≤ 2
Slip : -
Validation : -
[Initial Value] Thermal : n = 0
Slip : -
Validation : -
[Function]
<Thermal>
Sets raster print quality.
n is a decimal description (max. 255 digits) using ASCII characters.
n • Print quality
0 Specify high speed printing
1 Normal print quality
2 High print quality
<Slip>, <Validation>
Use prohibited.