Star Micronics Line Thermal/Dot Printer - Manual (Page 53)

Rev. 0.00
3-41
STAR Line Mode Command Specifications
ESC GS R n1 n2
[Name] Move relative position
[Code]
ASCII ESC GS R n1 n2
Hexadecimal 1B 1D 52 n1 n2
Decimal 27 29 82 n1 n2
[Defined Area] Thermal : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255
Slip : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255
Validation : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Moves the printing position from the current position to the (n1 + n2 x 256) dot position.
This command is ignored if the print region is exceeded.
When (n1 + n2 x 256) ≥ 32768, it moves {65536 – (n1 + n2 x 256)} dots in the left direction.
When (n1 + n2 x 256) < 32768, it moves (n1 + n2 x 256)} dots in the right direction.
The right margin is also the reference for upside-down printing.
<Thermal>
The left margin is also the reference for upside-down printing.
<Slip>, <Validation>
The right margin is also the reference for upside-down printing.