Star Micronics Line Thermal/Dot Printer - Manual (Page 118)

Rev. 0.00
3-106
STAR LIne Mode Command Specifications
FF
[Name] Execute top of form
[Code]
ASCII FF
Hexadecimal 0C
Decimal
12
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
<Thermal>
Executes top of form.
<Slip>, <Validation>
One byte ignored
ESC C n
[Name] Set page length to n lines
[Code]
ASCII ESC C n
Hexadecimal 1B 43 n
Decimal 27 67 n
[Defined Area] Thermal : 1 ≤ n ≤ 127
Slip : -
Validation : -
[Initial Value] Thermal : (Form feed amount initial value x 42)
Slip : -
Validation : -
[Function]
<Thermal>
When black mark is effective, this command is ignored.
<Slip>, <Validation>
Three bytes ignored