3) standard command details, 3-1) font style and character set, Esc rs f n – Star Micronics Line Thermal/Dot Printer User Manual
Page 15
Rev. 0.00
3-3
STAR Line Mode Command Specifications
3-3) Standard Command Details
3-3-1) Font style and character set
ESC RS F n
[Name]
Select font
[Code]
ASCII
ESC
RS
F
n
Hexadecimal
1B
1E
46
n
Decimal
27
30
70
n
[Defined Area]
Thermal
:
0 ≤ n ≤ 1, n = 16
Slip
:
-
Validation
:
-
[Initial Value]
Thermal
:
n = 0
Slip
:
-
Validation
:
-
[Function]
<Thermal>
Select font
n
Font
0
Font-A (12 x 24 dots)
1
Font-B (9 x 24 dots)
16
OCR-B (16 x 24 dots)
When OCR-B font is selected, the following functions are invalid.
• Code Pages
• Blank Code Pages
• International Characters
• Slashed Zero
When using the OCR-B font to read characters using a scanner, cancel adornment, expansion and
external character settings. Also, check the OCR-B font by actual use.
<Slip>, <Validation>
Only setting is valid
Setting is valid after switching to thermal.