Star Micronics Line Thermal/Dot Printer - Manual (Page 75)

Rev. 0.00
3-63
STAR Line Mode Command Specifications
SUB
[Name] External device 2 drive instruction
[Code]
ASCII SUB
Hexadecimal 1A
Decimal 26
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Drives external device 2. The energizing time and delay time for the external device 2 are fixed at
200 ms each.
As with other commands, it temporarily stores data in the data buffer, then executes in the order
received.
(Note) External device 1 and external device 2 cannot be executed simultaneously.
EM
[Name] External device 2 drive instruction
[Code]
ASCII EM
Hexadecimal 19
Decimal 25
[Defined Area] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Drives external device 2.The energizing time and delay time for the external device 2 are fixed at
200 ms each.
As with other commands, it temporarily stores data in the data buffer, then executes in the order
received.
(Note) External device 1 and external device 2 cannot be executed simultaneously.