Star Micronics Line Thermal/Dot Printer - Manual (Page 155)

Rev. 0.00
3-143
STAR Line Mode Command Specifications
ESC GS y S 0 n
[Name] Set QR code model
[Code]
ASCII ESC GS y S 0 n
Hexadecimal 1B 1D 79 53 30 n
Decimal 27 29 121 83 48 n
[Defined Area] Thermal : 1 ≤ n ≤ 2
Slip : -
Validation : -
[Initial Value] Thermal : n = 2
Slip : -
Validation : -
[Function]
<Thermal>
Sets the model.
• Parameter details
n Set model
1 Model 1
2 Model 2
<Slip>, <Validation>
Only setting is valid
Setting is valid after switching to thermal.
ESC GS y S 1 n
[Name] Set QR code mistake correction level
[Code]
ASCII ESC GS Y S 1 n
Hexadecimal 1B 1D 79 53 31 n
Decimal 27 29 121 83 49 n
[Defined Area] Thermal : 0 ≤ n ≤ 3
Slip : -
Validation : -
[Initial Value] Thermal : n = 0
Slip : -
Validation : -
[Function]
<Thermal>
Sets the error correction level.
• Parameter details
n Error Correction Level Error Correction Rate (%)
0 L 7
1 M 15
2 Q 25
3 H 30
<Slip>, <Validation>
Only setting is valid
Setting is valid after switching to thermal.