Star Micronics Line Thermal/Dot Printer - Manual (Page 84)

Rev. 0.00
3-72
STAR LIne Mode Command Specifications
ESC RS E n
[Name] Initialize ASB ETB counter, and ETB status.
[Code]
ASCII ESC RS E n
Hexadecimal 1B 1E 45 n
Decimal 27 30 69 n
[Defined Area] Thermal : n = 0, 48 (“0”)
Slip : n = 0, 48 (“0”)
Validation : n = 0, 48 (“0”)
[Initial Value] Thermal : ASB ETB counter = 0
Slip : ASB ETB counter = 0
Validation : ASB ETB counter = 0
[Function]
Clears the ASB ETB counter to zero and clears the ETB status.
However, when clearing the ETB counter to zero using this command, ASB status is not transmitted.
The ETB counter and ETB status are initialized by the following command in addition to this com-
mand.
• Cancel print data and initialize commands <CAN>