Star Micronics Line Thermal/Dot Printer - Manual (Page 111)

Rev. 0.00
3-99
STAR Line Mode Command Specifications
ESC * r K n NUL
[Name] Set raster print color
[Code]
ASCII ESC * r K n NUL
Hexadecimal 1B 2A 72 4B n 00
Decimal 27 42 114 75 n 0
[Defined Area] Thermal : 0 ≤ n ≤ 3
Slip : -
Validation : -
[Initial Value] Thermal : n = 0
Slip : -
Validation : -
[Function]
<Thermal>
Sets raster print color.
This command is effective only when specifying the 2 color mode using the line mode.
This command is ignored when not in the 2 color print mode.
n is a decimal description (max. 255 digits) using ASCII characters.
n Print color
0 Black
1 Cyan
2 Magenta
3 Yellow
(*) This command is valid only when using a model that supports 2-color printing. This command is
ignored on non-compatible models.
<Slip>, <Validation>
Use prohibited.