Speco Technologies & IP-WDRB1 - Manual (Page 100)

100
IP Camera User’s Manual Speco Technologies
Fig. 5―4 IP Check
After finding IP, double-click IP of THE CAMERA to go to the editable Mode as follows.
Fig. 5―5 IP Check
Input new IP Address, Default Gateway, Subnet Mask, and then input Password of THE CAMERA
Administrator and click ‘IP Change’, to set up new IP of THE CAMERA. Upon completion of setting,
find new IP and click ‘Ping’ to check whether setting is done, and close the program by clicking
‘End’ button.