Speco Technologies & IP-WDRB1 - Manual (Page 67)

67
IP Camera User’s Manual Speco Technologies
① Press the SET button to display the SETUP menu and move the
arrow indicator to ‘DNR’ using the UP or DOWN button.
② SET ‘DNR’ to the desired mode using the LEFT or RIGHT button.
▶HIGH : High reduction of the noise
▶MIDDLE : Middle reduction of the noise
▶LOW : Low reduction of the noise
▶OFF : Deactivation
Notes
6) Digital Noise Reduction (Dynamic Noise Reduction)
DNR is to reduce the noise on the screen.
If you change the ‘GAIN’ menu from AGC-L to AGC-H
sensitivity is increased as well as noise on the screen.
When selected ‘GAIN’ menu OFF, DNR will not work.