Speco Technologies & IP-WDRB1 - Manual (Page 72)

72
IP Camera User’s Manual Speco Technologies
① Press the SET button to display the setup menu and move the arrow indicator
to ‘SYNC’ using the UP and DOWN button.
② SET to the desired mode using the LEFT or RIGHT button.
C) SYNC
Line Lock is only available in the 24 volt AC mode of operation.
In 12 volts DC, the SYNC menu is always in the ‘INTERNAL’ mode.
Notes
Two SYNCHRONIZATION modes are available… INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, the camera syncs to the 60 Hz phase.
▶ INT : Internal synchronization
▶ L/L : If you choose ‘L/L’, you can adjust the desired phase.
- Press the SET button.
- You can adjust the desired phase from 0 to 270.