Speco Technologies & IP-WDRB1 - Manual (Page 92)

92
IP Camera User’s Manual Speco Technologies
To set the blocking area, press FOCUS FAR button when the MOVE MODE is
appeared. Then use the five keys to the user defined area in order to set blocking
area. Then press FOCUS FAR button again to escape from MOVE MODE.
To adjust size of blocking area, move five keys to the right or left direction when the
cursor is on ACTION. After move mode changed to ADJUST MODE, press FOCUS
FAR button in order to adjust the size of blocking area. The size of blocking area can
be adjustable by using five keys up down or left right,. After adjusting size of blocking
area, press FOCUS FAR button to escape ADJUST mode.
ADJUST: You can change the masking size by using five keys to the left or right
direction
MOVE: You can move the masking area by using five keys to the left or right
direction (Default)
F-4. PRIVACY SET – SAVE
After setting the privacy masking zone, to save the data, move five keys to the right
direction when the cursor is on SAVE. After saving the data, the cursor moves to
PRIVACY NO.2 automatically to prepare the next privacy masking zone.
F-5. PRIVACY SET – EXIT
To escape this page, move five keys to the right direction
G. PATTERN SET
8 programmable patterns are available with 16 characters of title.
G-1. PATTERN SET – PATT NO.
PATTERN SET
PATT NO : 01
PATT TITLE: PATTERN01□□□□□□□
DATA FILL : 100%
SAVE
EXIT
DEFAULT SETTING