Speco Technologies & IP-WDRB1 - Manual (Page 65)

65
IP Camera User’s Manual Speco Technologies
① Press the SET button to display the SETUP menu and move the arrow
indicator to ‘WHITE BALANCE’ using the UP or DOWN button.
② Set ‘WHITE BAL.’ to the desired mode using LEFT or RIGHT button.
5) WHITE BALANCE (WHITE BAL.)
For color control on the screen, use ‘WHITE BALANCE’ function.
▶ ATW (Auto Tracking White Balance)
: When color temperature is 2400~12000K, select this
mode.
(ex. A fluorescent lamp, outdoor)
▶ AWC (Auto White Balance Control)
: The white balance is automatically adjusted in a specific environment.
In order to obtain the best result, press the set button while the camera
focuses on white paper. If the environment including the light source is
changed, you have to adjust the white balance again.