Speco Technologies & IP-WDRB1 - Manual (Page 88)

88
IP Camera User’s Manual Speco Technologies
C-3. PRESET – PAN: XXX.X TILT: XX.X
Press FOCUS FAR button in order to set preset position then, use the five keys to the
position where memorized preset no. is needed. Then press FOCUS FAR button again
after setting a preset location.
C-4. PRESET – SAVE
Move five keys to the right direction when the cursor is at SAVE and then the cursor will
be located on Preset ID for the continuous preset No. setting.
C-5. PRESET – EXIT
To escape this page, move five keys to the right direction.
D. AUTO SCAN SET
D-1. AUTO SCAN- START ANGLE
To set start angle, press FOCUS FAR button then move five keys to the starting angle
which is needed memorized. To press FOCUS FAR button again is to escape.
D-2. AUTO SCAN- END ANGLE
To set end angle, press FOCUS FAR button then move five keys to the starting angle
which is needed memorized. To press FOCUS FAR button again is to escape.
D-3. AUTO SCAN – DIRECTION
Auto Scan directions are available with two direction as CW or CCW by five keys to the
AUTO SCAN SET
START ANGLE :
XXX.X.XX.X
END ANGLE :
XXX.X.XX.X
DIRECTION : CW
ENDLES : OFF
SPEED : 10 °/S
DWELL TIME : 03
SAVE AND EXIT
DEFAULT SETTING