Speco Technologies & IP-WDRB1 - Manual (Page 80)

80
IP Camera User’s Manual Speco Technologies
A. Dome Setup
To enter Dome setup, use the five keys right to move when cursor on dome setup.
A-1. DOME SET - CAMERA ID
To set camera ID, select up to 16 characters using Five keys to the left or right.
Press ZOOM TELE button to move to the next character from left to right direction and
ZOOM WIDE button to move to the next character from right to left direction
(Space displays when appears)
A-2. DOME SET - RECOVER
This feature allows the dome to work from the last setting before you use the dome
manually
(Auto scan, group tour, preset, pattern or sectors) , after the set time, even power shut
down and it turns on again. Recover time can be programmed from 15 second to 99
seconds. The default setting is OFF.
A-3. DOME SET - MANUAL SPEED
Manual Speed of Pan/Tilt is selectable from 100°/sec up to 150°/sec. The default
setting is 100°/sec
A-4. DOME SET - AUTO FLIP
Auto Flip is available and the default setting is OFF. Move five keys “right or left” to
DEFAULT SETTING
DOME SET
CAMERA ID : CAM1□□□□□□□□□□□□
RECOVER : OFF
MANUAL SPEED : 100 °/S
AUTO FLIP : OFF
ZOOM SPEED : FAST
ALARM : DISABLE
LANGUAGE : ENGLISH
[NEXT PAGE]
SAVE AND EXIT
EXIT