Speco Technologies & IP-WDRB1 - Manual (Page 43)

43
IP Camera User’s Manual Speco Technologies
4.8. Camera Setting(support for IP-SD10X)
Fig. 4-20 Camera Setting
It is available to pre-set Pan/Tilt/Zoom Cameras.
Preset Setting is available up to 20, but may be less than 20 for some model of Camera.
(1) OSD Menu: to activate OSD Menu.
(2) Preset No: to select the Preset Number to set up.
(3) Preset SET: ‘SET’ button is to set the current coordinate as preset location with
name recorded by user. In 3 seconds after pushing ‘SET’ button, the Preset
coordinate is to be set. Don’t move Camera during the time (about 3 seconds).
(4) Preset Move: to move to the selected preset number.
(5) Tour No: to select the Tour Number to set up.
(6) Tour Move: to move to the selected preset number.
(7) Pattern No: to select the Pattern Number to set up.
(8) Pattern Move: to move to the selected Pattern number.
(9): Adjustment of Pan/Tilt/Zoom/Speed/Focus: to move to the location to preset by
adjusting Pan/Tilt/Zoom/Focus.