Speco Technologies & IP-WDRB1 - Manual (Page 68)

68
IP Camera User’s Manual Speco Technologies
① Press the SET button to display the SETUP menu and move the
arrow indicator to ‘Intensifier’ using the UP or DOWN button.
② SET ‘Intensifier’ to the desired mode using the LEFT or RIGHT button.
Notes
▶AUTO : When your camera is under night or low-lighting level,
select this mode.
7) INTENSIFIER
Allows you to get clear images with this function under night
or low light conditions
If you press SETUP button at ‘AUTO’ menu, you can control the
lowlight action maximum magnifications.(X2~X128)
Increasing the amount of Intensification results in brighter pictures
Under low light conditions, and may increase image lag.
Increasing the amount of intensification may cause image noise
which is to be expected as a normal condition.