Speco Technologies & IP-WDRB1 - Manual (Page 40)

40
IP Camera User’s Manual Speco Technologies
Fig. 4―18 Alarm Setting
Designate condition to drive Event in ‘Alarm Condition’, such as Sensor Event, Motion detection
Event or Sensor + Motion detection Event, If Sensor Event is selected, make Sensor settings
Upon event situation after setting on ’Enable’ in ‘Alarm’ of ‘Alarm Event’, Event is to be transmitted
to user’s Viewer and inform detection of Event, with flickering on screen and alarm sound. (refer to
5. Basic Use).
To use SMS Service and E-mail transmitting Event to Alarm Server, go to ‘Alarm Style’-> ‘Alarm
Server’ and input Domain Name of Alarm Server (‘Alarm Server’ is defaulted as Ipcam4u.net).
To send the recorded video to FTP Server upon alarm event, go to ‘Alarm Style’-> ‘FTP’ and
input FTP Server Address, Directory, User IP and Password, FTP Directory (mandatory). Make the
user’s directory in ftp root of User’s FTP Server to get recorded files to be transmitted. Click ‘Save’
Button to save setting.
In case of setting to send Event to Alarm Server, register THE CAMERA in Service Server to use
Alarm Server (refer to ‘‘Use of Service Server’ in ‘ 5. Basic Use)