Speco Technologies & IP-WDRB1 - Manual (Page 28)

28
IP Camera User’s Manual Speco Technologies
14) Set Port in Port Setting Page of [3-12]. It is required to set each different Port for
many THE CAMERA Network Cameras under 1 Router.
15) Click ‘Save’ Button to save set value.
16) Remove LAN Cable (Crossover Cable) connected between THE CAMERA and PC.
17) Connect THE CAMERA to Network with LAN Cable (Straight Cable).
18) Connect PC to Network with LAN Cable (Straight Cable).
19) Port-Forward the port designated to use THE CAMERA, in IP Sharing Device. Refer
to manual of IP Sharing Device for details.
20) Check 1 (local check)
Run Web Browser and input IP address of THE CAMERA in URL and click ‘Enter’. If you
changed Web Server Port, you must input ‘http://IP Address:Port Number’. For example, if
you set IP address of THE CAMERA to 192.168.10.88 and changed Web Server port to 81,
you must input http://192.168.10.88:81 .
Fig. 3―13 Main Page of THE CAMERA
After [3-13] appears, check Video of THE CAMERA referring to‘ 2. Install and Video Check ’.
21) Check 2 (Check from outside)
After registration of THE CAMERA in Service Server (refer to ‘‘ Use of Service Server ’ of ‘‘ 5.
Basic Use ’,