Speco Technologies & IP-WDRB1 - Manual (Page 39)

39
IP Camera User’s Manual Speco Technologies
4.4. Color Setting
This is to adjust color of channel.
Fig. 4―17 Display Color Setting
Upon adjustment of color on [4-17], then click ‘Save’ to save the setting value. In case to
return to default, click ‘Default’ to go to default. Even in this case, it is required to click ‘Save’
Button to save the setting value.
4.5. Alarm Setting
4.5.1. Alarm Event Setting
To get Alarm Service on THE CAMERA, go to ‘Administrator's Page’ ’Alarm Setting’ and tick
‘Enable’ in ‘Alarm’.