Speco Technologies & IP-WDRB1 - Manual (Page 46)

46
IP Camera User’s Manual Speco Technologies
Fig. 4―24 Firmware Download
‘Downloading’ message will be shown until completion of Update as [4-24] (it may take time
according to Network situation). Upon completion of upgrade, there appears message showing
upgrade result.
[4-25] is the message showing that upgrade has been correctly done. Click ‘Restart’ in
‘System Restart’ to restart System of THE CAMERA.
Fig. 4―25 Completion of Upgrade
If [4-26] is displayed as below, this means that THE CAMERA has been upgraded to the
latest Version, there is no need to update any more.
Fig. 4―26 Check of Upgrade Version
If user found [4-27], there is a error in connection to Upgrade Server, re-check Internet
Connection or re-check DNS Server Address in ‘3. Basic Setting ’ and try to upgrade again. If