Sony DSR-2000AP - Manual (Page 111)

Chapter 6
Setup Menu
Chapter 6 Setup Menu
111
Extended Menu
Items in the Extended Menu
The extended menu contains the following items.
In the Settings column of the table, the factory default
settings are indicated by an enclosing box.
Item number Item name Settings
101 SELECTION FOR
SEARCH DIAL
ENABLE Select how the unit enters the search mode.
DIAL : Press the SEARCH or VARIABLE button or, except during recording/editing, turn
the search dial.
KEY: Press the SEARCH or VARIABLE button.
Menu items in the 100s, relating to the control panels
102 MAXIMUM TAPE
SPEED Specify the maximum tape speed in search mode (shuttle) or F.FWD (fast forward)/
REW (rewind) mode.
105 REFERENCE
SYSTEM ALARM Select whether or not to display a warning when the reference video signal is not
supplied or is out of phase with the input video signal.
OFF: No warning.
LIMIT : Flash the STOP button as a warning only when the reference video signal is out
of phase with the input video signal.
ON: Flash the STOP button as a warning.
107 REC INHIBIT
LAMP FLASHING Select whether to keep lit or flash the REC INHIBIT indicator when recording is
prevented with the REC INHIBIT switch on the subsidiary control panel set to OFF.
OFF : Light the REC INHIBIT indicator.
ON: Flash the REC INHIBIT indicator.
108 AUTO EE
SELECT When a cassette is inserted and the PB/EE button is lit,select the operation modes in
which input video and audio signals are automatically handled in E-E mode.
S/F/R : In STOP/F FWD (fast-forward)/REW (rewind) modes
STOP: In STOP mode
109 FORCED EE
WHEN TAPE
UNTHREAD During tape threading and unthreading, or when no cassette is inserted, select whether
the PB/EE button controls the output signal PB/EE setting.
ON : No control (the signal is always an E-E signal).
OFF: Control.
Sub-item
1 SHUTTLE Specify the maximum tape speed in search mode (shuttle).
X16: Maximum 16 times normal
X32 : Maximum 32 times normal
X60: Maximum 60 times normal
2 F.FWD/REW Specify the maximum tape speed in F.FWD/REW mode.
X32: Maximum 32 times normal
X60: Maximum 60 times normal
X85 : Maximum 85 times normal
MAX: No maximum tape speed is specified.
Note
When this item is set to MAX, the playback video signal is muted.
(Continued)