Sony DSR-2000AP User Manual
Page 139
Chapter 8
Maintenance and Troubleshooting
Chapter 8
Maintenance and Troubleshooting
139
Alarm messages and associated directions (Continued)
Alarm message on monitor screen
Direction
Alarm message in the
display section
Cause
Tape cannot be replayed.
Use a tape recorded in 525/60 format. (For DSR-
2000A)
625/50 Tape (For DSR-
2000A)
Use a tape recorded in 625/50 format. (For DSR-
2000AP)
525/60 Tape (For DSR-
2000AP)
Use a new cleaning tape.
Tape end!
Tape end has been detected.
Tape not editable.
Use a tape recorded in DVCAM format.
Not DVCAM!
Use a tape recorded in 525/60 format. (For DSR-
2000A)
625/50 Tape (For DSR-
2000A)
Use a tape recorded in 625/50 format. (For DSR-
2000AP)
525/60 Tape (For DSR-
2000AP)
Tape not usable.
Use DVCAM/DV/DVCPRO (25) tape.
TC EXTERNAL is selected.
ILL. Tape!
Set the INT/EXT switch on the subsidiary contol
panel to INT.
TC EXT!
TCG REGEN mode is selected.
Set the PRESET/REGEN switch on the subsidiary
control panel to PRESET.
REGEN mode!
TCG RUN mode is set to REC RUN.
Set the FREE RUN/REC RUN switch on the
subsidiary control panel to FREE RUN.
REC RUN!
Remote mode is selected.
Turn off the REMOTE button.
REMOTE!
Tape not recordable.
Use a DVCAM/DV ME tape.
REC INHI.!