Sony DSR-2000AP - Manual (Page 121)

Chapter 6
Setup Menu
Chapter 6 Setup Menu
121
Extended Menu Operations
To use the extended menu, set basic menu item 099
MENU GRADE to ENHAN beforehand.
In the extended menu, you can carry out the same
operations as in the basic menu except setting of sub-
items.
To set sub-items
Operate as follows.
1
Turn the search dial to select the desired menu
item.
For information about how to select a menu item, see
the section “Changing the currently displayed menu
item” (page 109).
2
Holding down the STOP button, turn the search
dial to select the desired sub-item.
3
Holding down the SEARCH button, turn the search
dial to change the value for the selected sub-item.
3 1
2
Making settings for mixing an audio input
signal (extension menu item 819)
Using extension menu item 819, you can mix audio
input signals, dub an audio input signal over a channel
previously recorded on the tape, or mix an audio input
signal with an audio channel recorded on the tape
(sound-on-sound).
To carry out the extension menu item 819 settings, use
the following procedure.
1
Select extension menu item 819.
For details of selecting a menu item, see the section,
“Changing the currently displayed menu item” (page
109).
2
Press the STOP button.
The following displays appear in the display
section of the lower control panel and on a monitor
connected to this unit.
Display section
Recording channel number
2 4
3 6
Input channel number
Item number Setting
(Continued)