Sony DSR-2000AP - Manual (Page 54)

Chapter 3
Recording and Playback
54
Chapter 3 Recording and Playback
Playback
Playback using the capstan override function
You can use the capstan override function to adjust the playback speed
temporarily. This function is convenient for playback phase
synchronization with another VCR playing back the same program.
1
(A) Hold down the PLAY button, and turn the search dial in the
desired direction to adjust the playback speed.
The range of speed adjustment is ±15% in steps of 1%.
(B) Hold down the PLAY button, and press the TRIM buttons to
adjust the playback speed.
The playback speed can be adjusted to ±8% only.
The SERVO indicator in the display section goes off.
2
When the adjustment is completed, release the PLAY button.
The tape transport returns to normal speed, and the SERVO indicator
in the display section lights on again.
Display section
1
(A)
1
(A)
,1
(B)
,2 1
(B)