Sony DSR-2000AP - Manual (Page 70)

Chapter 4
Editing
70
Chapter 4 Editing
Automatic Editing
Player settings
(In the subsequent description, except where the player is explicitly
mentioned, operations are all on the recorder.)
Selecting an Edit Mode
Select either assemble mode or insert mode.
Depending on the desired edit mode, press the following button or buttons.
• For assemble editing: ASSEMBLE button
• For insert editing: the desired INSERT buttons (VIDEO, CH-1 to CH-4,
TC)
When you select an edit mode, the IN and OUT buttons begin to flash,
indicating that the edit points require setting.
POWER switch: I side
PB controls (page 17) :
adjust the audio playback
levels.
REMOTE button (page 16) : lit
9PIN (when using REMOTE-
IN/-OUT) or i.LINK (when
using i.LINK) button: lit
COUNTER SEL button (page
19): select the data to be
displayed (counter value or
time code value)
PB button (page 19) : lit
TC SELECT switch (page 27) : TC or VITC, when displaying time code
INSERT buttons
ASSEMBLE button
IN button and OUT button