Sony DSR-2000AP - Manual (Page 40)

40
Chapter 2 Setting/Displaying Time Data and Text Information
Chapter 2
Setting/Displaying Time Data and Text Information
Setting Time Code and User Bits
Setting an initial time code value
Set the buttons and switches as shown below.
Button/switch settings
To set an initial time code value, use the following procedure.
REMOTE button
CHARACTER switch
FREE RUN/REC RUN switch
INT/EXT −PRESET/REGEN switch
Buttons/switches Settings
REMOTE button Off
CHARACTER switch ON
INT/EXT
−PRESET/REGEN switch
INT
−PRESET
FREE RUN/REC RUN switch As required
DF/NDF switch As required
RESET button
1 2 7
5
(3),4
Display section
FREE RUN/REC RUN switch
DF/NDF switch