Sony DSR-2000AP - Manual (Page 52)

Chapter 3
Recording and Playback
52
Chapter 3 Recording and Playback
Playback
Playback in shuttle mode
In shuttle mode, you can control the speed of playback by the angular
position of the search dial. The range of playback speed is
±32 times
normal speed (can be changed using menu item 102).
There are detents on the search dial at the still position and at
±10 times
normal speed.
To carry out playback in shuttle mode, use the following procedure.
1
Press the SEARCH button or search dial so that the SHUTTLE
indicator in the display section is lit.
Pressing the search dial toggles between jog mode and shuttle mode.
2
Turn the search dial to the desired angle corresponding to the desired
playback speed.
Playback in shuttle mode starts.
3
To stop playback in shuttle mode, return the search dial to the center
position, or press the STOP button.
To return to normal-speed playback
Press the PLAY button.
To alternate between normal-speed playback and shuttle mode
playback
Set the search dial to the position corresponding to the desired shuttle
playback speed, then switch between normal-speed playback and shuttle
playback by pressing the PLAY and SEARCH buttons alternately.
For intermittent shuttle mode playback, press the STOP and SEARCH
buttons alternately.
Display section
1,2,3
1 3