Sony DSR-2000AP - Manual (Page 119)

Chapter 6
Setup Menu
Chapter 6 Setup Menu
119
Item number Item name Settings
Menu items in the 700s, relating to video control (continued)
729 CLOSED
CAPTION BLANK
(DSR-2000A only) Select whether to mute the closed caption signal to be superimposed on the 1st and
2nd fields of the output video signal.
Sub-item
FIELD 1 1
2 FIELD 2
Select whether to mute the closed caption signal to be superimposed on the 1st field of
the output video signal.
OFF : Do not mute.
ON: Mute.
Select whether to mute the closed caption signal to be superimposed on the 2nd field of
the output video signal.
OFF : Do not mute.
ON: Mute.
Note
When you make settings for items 715 to 720, set the
PROCESS CONTROL switch on the subsidiary
control panel to MENU. When it is set to MENU, all
controls on the subsidiary control panel are disabled.
Item number Item name Settings
801 DIGITAL JOG
SOUND Select whether to adjust the audio playback speed during slow playback.
OFF: Do not adjust the audio playback speed.
ON : Adjust the audio playback speed.
Menu items in the 800s, relating to audio control
802 DIGITAL AUDIO
MUTE IN
SHUTTLE MODE Set the audio muting conditions during shuttle playback.
OFF : Not muted.
CUEUP: Muted during cue-up or preroll operations.
FULL: Muted in shuttle mode.
807 AUDIO OUTPUT
PHASE Select the output timing of an audio playback signal. The reference position corresponds
to a setting of 80H; when the setting is less than 80H, the output timing is advanced,
and when it is higher than 80H, the output timing is delayed. (80H = 128 samples =
approx. 2.7 ms, 1 sample = approx. 20 µs)
0 ... 80 ... FF : Setting in this range.
(Continued)
723 INPUT VIDEO
BLANK
(DSR-2000AP only) Switching blanking on or off for the 335th line of the input video signal. Select the
reference video signal to use.
Sub-item
LINE335 THROUGH : Do not mute.
BLANK: Mute.
731 WIDE MODE Determine whether to retain wide-screen aspect ratio information accompanying video
being recorded or played back.
AUTO : When video being recorded or played back is accompanied by wide-screen
aspect ratio information, retain the information.
ON: Whenever recording or playing back video, retain wide-screen aspect ratio
information.
OFF: Ignore wide-screen aspect ration information.