Sony Metz SCA 3302 M7 - Manual (Page 26)

Tip:
HSS flash control should only be used when really
required.
To ensure proper operation of the internal light
control of the mecablitz in the HSS flash mode,
no filter attachments (e.g. neutral density or
colour effects filters), diffusers (bouncers) etc.
must be mounted in front of the reflector. The
wide-angle diffuser (20 mm) integrated in the
mecablitz must not be swivelled in front of the
reflector. The use of attachments in the HSS
flash mode may result in exposure errors. If
you wish to use such attachments make sure
to deactivate the HSS mode.
For system-induced reasons, it is not possible
to use an external flash meter in the HSS
mode.
Remember to delete this operating mode after
shooting. Otherwise guide number and maxi-
mum flash range will unnecessarily be sacri-
ficed.
4.13.2 Switching off the HSS flash mode
Press the “Mode” button on the mecablitz 54 MZ-..
repeatedly until “TTL” or “M” flashes on the LC dis-
play. Turn the setting disk until “HSS” is extinguis-
hed on the display. Then push the setting disk in
the direction of the arrow for storage. Storage will
be automatic after 5 seconds if the setting disk is
not pushed. The LC display of the mecablitz now
only indicates “TTL” or “M”.
☞
26
700 47 0113.A10 GB-I-E 20.02.2008 13:15 Uhr Seite 26