Sony Metz SCA 3302 M7 - Manual (Page 48)

must be fitted with an AF-D lens (Dynax 5, Dynax 7)
that transmits the necessary distance information
to the camera. Please refer to the camera manual
for details about the setting procedure of ADI flash
control on the camera).
On account of pre-flash metering ADI flash
control does not allow the use of an external
flash meter.
4.19.1 Dynax 4, 5, 7
For system-induced reasons only the mecablitz
54 MZ-... can be used for ADI flash control with the
above cameras.
The mecablitz must be set to TTL-HSS mode for
ADI flash control (see Section 4.13.1) ADI flash
control is not specifically displayed on the meca-
blitz.
The mecablitz will not fire a pre-flash when:
The reflector is swivelled out of its normal
position.
Second-curtain synchronisation has been set
(REAR mode).
The secondary reflector of the mecablitz has
been switched on.
The camera operates with mirror lock-up.
In this instance the mecablitz will operate with
normal TTL flash control.
To ensure proper operation of ADI flash control
with the above cameras no filter attachments
(e.g. neutral density or colour effects filters),
diffusers (bouncers) etc.,must be mounted in
front of the reflector. The wide-angle diffuser
☞
☞
☞
48
700 47 0113.A10 GB-I-E 20.02.2008 13:15 Uhr Seite 48