Sony Metz SCA 3302 M7 - Manual (Page 47)

44 MZ-2, 45 CL-4 (with SCA 3000 C adapter),
50 MZ-5, 54 MZ-..., 70 MZ-.. and 76 MZ-5 digi
For multi-zone flash expsoure metering the TTL
mode must be selected on the mecablitz. There are
no restrictions with regard to reflector attach-
ments. Please refer to the hints given in the came-
ra’s operating instructions.
mecablitz 32 Z-2, 32 MZ-3, 40 MZ-..., 45 CL-4,
50 MZ-3:
This flash mode is not specifically indicated on the
mecablitz or the SCA adapter.
4.18.3 Dynax 5D, 7D,
αα100
(54 MZ-.., 45 CL-4 digi, 76 MZ-5 digi only)
When a Dynax 7D is operated in ADI mode, the flash
unit must always be switched to TTL-HSS mode if
this setting is available on the given flash unit. The
system does not allow TTL flash mode when using a
flash unit without the TTL-HSS function.
With the mecablitz 76MZ-5 digital, ADI flash control
is only possible in TTL flash mode for cameras
Dynax 7D, Dynax 5D and Sony
α100 .
With the mecablitz 45 CL-4 digital, ADI flash control
is possible in flash modes TTL and TTL-HSS for
cameras Dynax 7D, Dynax 5D and Sony
α100 .
4.19 ADI flash control (Advanced
Distance Integration)
ADI flash control is a multi-zone flash metering
system (pre-flash) expanded by guide number con-
trol. To enable guide number control, the camera
47
ķ
700 47 0113.A10 GB-I-E 20.02.2008 13:15 Uhr Seite 47