Sony Metz SCA 3302 M7 - Manual (Page 30)

an automatic white balance with the result that the
shots may be colour cast.
4.16 Wireless Minolta TTL Remote Mode
Various Minolta cameras (xi-, si-series, Dynax 9
and Dynax 7, Dimage 7i, 7Hi) offer the possibility of
cordless flash operation in the Wireless Minolta
TTL Remote Mode. A controller mounted on the
camera permits wireless remote TTL control of one
or more slave flash units. The function of the con-
troller is taken over by a Minolta flash unit 5400xi /
5400HS / 3600HS(D) / 5600HS(D), the Minolta
Wireless Remote Flash Controller or the folded-out
flash unit integrated in the camera. Four remote
addresses (channels) can be selected to ensure
that different Minolta TTL remote systems do not
interfere with each other in the same room.
A certain remote camera address can only be
set on a Minolta flash unit (see above), the
Minolta Wireless Remote Flash Controller or a
mecablitz 54 MZ-..., 70 MZ-... or 76 MZ-5 digi
with the SCA 3302 adapter. The remote
address cannot be set on the camera, nor does
the camera display the remote address.
The following mecablitz models can be used as sla-
ves together with the SCA 3302 adapter: mecablitz
40 MZ-..., 45 CL-4 digi, 50 MZ-5, 54 MZ-..., 70 MZ-
... and 76 MZ-5 digi.
Please note:
• The mecablitz must be in the "TTL" mode. If a
Dimage 7i or 7Hi is used in conjunction with the
54MZ-..., 70MZ-... and 76 MZ-5 digi mecablitz,
☞
30
700 47 0113.A10 GB-I-E 20.02.2008 13:15 Uhr Seite 30